Description:

Working parameters

Roller diameter (tool clamping surface): 850mm

               Roller width: 700mm

Adjustment distances

               Roll gap adjustment: ± 40 mm

Blank dimensions

               Diameter, max.: 80 mm

               Length, max.: 600 mm

Speed

               Roller speed, max.: 15 1/min

Achievement

               Roller drive: 160 kW

Cycle times

A cross roller, min.: 4 sec.

               Two cross rollers, min.: 2 sec.

Power supply

Current

Operating voltage, +5% /-10%: 400 V

Frequency: 50 Hz

Connected load: 280 kVA

Required pre-fuse: 630 A

Consumption

               Water

                              Oil cooling roller gearbox, approx. 0.9 m³/h

               The values for the cooling water quantity assumed a water inlet temperature into the coolers of: T ≤ 25°C

                              Roller cooling, depending on application: 0.4 m³/h

               Operating pressure: approx. 7 bar

               Compressed air

                              Operating pressure: 5 bar