Machine Name:(03) 1200t Aida Cold Forging Press
Manufacturer:Aida
Model:UL1200
Year of Manufacture:2012
Location:Japan
Machine Id:551
Disclaimer:

The presented specifications have been prepared to the best of our knowledge, and therefore, we cannot be held liable for any errors or omissions!

Buyers are invited to inspect the offered Machinery and Equipment at the current location prior to purchase.

(03) 1200t Aida Cold Forging Press
(03) 1200t Aida Cold Forging Press
(03) 1200t Aida Cold Forging Press
(03) 1200t Aida Cold Forging Press
(03) 1200t Aida Cold Forging Press

Description:

Technical Details AIDA 1200t

General Equipment Specifications:

  • Press Capacity: 1200 t
  • Year of Manufacturing: 2012.
  • Capability Location: Above dead center, 10 mm
  • Continuous Operation:
    • 15 spm, 71 kJ
    • 26 spm, 167 kJ
    • 30 spm, 174 kJ
    • 40 spm, 181 kJ
  • Intermittent Operation: 25 spm, 12 cycles, 198 kJ
  • Stroke Length: 250 mm
  • Idle Continuous Stroke Rate: 15-40 spm
  • Intermittent Stroke Rate: 25 spm at 12 spm
  • Micro-Inching: Approx. 10 spm
  • Die Height: 750 mm
  • Slide Adjustment: 100 mm
  • Slide Dimensions (LxW): 2450 x 1000 mm
  • Bolster Dimensions (LxW): 2450 x 1200 mm
  • Bolster Thickness: 250 mm
  • Bolster Surface Height from Floor: 800 mm
  • Maximum Die Hanging Weight: 4.0 tons
  • Side Opening Dimensions (WxH): 1050 x 510 mm
  • Main Motor: INY 160 kW
  • Power Supply:
    • Main Motor: AC400V, 50Hz
    • Other Motors: AC200V, 50Hz
    • Control Circuit Voltage: AC100V, DC24V
  • Supply Air Pressure: 0.5 MPa, boosted to 0.6 MPa
  • Ambient Temperature: 5-40°C
  • Total Mass Above Floor: 216 tons

Special Equipment Features:

  • Variable Speed Drive: Main motor with regenerative control
  • Reversing Installation: Not available for press-down tests
  • Micro-Inching: Low-speed rotation type for the main motor
  • Flywheel Brake: Interlinked with the main motor
  • Crank Angle Indicator: Electronic, within the main control panel
  • Main Motor Power Meter: Digital display
  • Press Speed Meter: Digital display
  • Die Height Meter: Digital display with a resolution of 0.01 mm
  • Die Height Adjustment: Electric manual via push-button operation, automatic with digital setting at 0.1 mm increments
  • Load Measurement: Graphic display, ALA2 model strain gauge type (also detects overloads)
  • Lubrication System: Forced circulation (installed in the pit), automatic intermittent lubrication
  • Hydraulic Equipment Operation: Installed in the pit
  • Control Panel: Stand-alone type, within 30 meters
  • Operator Console: Located at the front right frame
  • Operator Stand: Dual-hand operation with a 3-meter cable
  • Receptacle for Operator Stand: Located at the front right frame
  • Timing Switch: Digital, with four spare circuits
  • Production Counter: Reset type with a stop function after a set number, 6-digit display
  • Emergency Stop Button: Lock type, positioned at various points around the room and at the operator stand
  • Setup Stop Device: Switches between top dead center and 600 mm stroke

Promote your used machinery online, find buyers with us.

Related to: (03) 1200t Aida Cold Forging Press

551