Description:

Technical Details AIDA 1200t

General Equipment Specifications:

• Press Capacity: 1200 t
• Year of Manufacturing: 2012.
• Capability Location: Above dead center, 10 mm
• Continuous Operation:
• 15 spm, 71 kJ
• 26 spm, 167 kJ
• 30 spm, 174 kJ
• 40 spm, 181 kJ
• Intermittent Operation: 25 spm, 12 cycles, 198 kJ
• Stroke Length: 250 mm
• Idle Continuous Stroke Rate: 15-40 spm
• Intermittent Stroke Rate: 25 spm at 12 spm
• Micro-Inching: Approx. 10 spm
• Die Height: 750 mm
• Slide Adjustment: 100 mm
• Slide Dimensions (LxW): 2450 x 1000 mm
• Bolster Dimensions (LxW): 2450 x 1200 mm
• Bolster Thickness: 250 mm
• Bolster Surface Height from Floor: 800 mm
• Maximum Die Hanging Weight: 4.0 tons
• Side Opening Dimensions (WxH): 1050 x 510 mm
• Main Motor: INY 160 kW
• Power Supply:
• Main Motor: AC400V, 50Hz
• Other Motors: AC200V, 50Hz
• Control Circuit Voltage: AC100V, DC24V
• Supply Air Pressure: 0.5 MPa, boosted to 0.6 MPa
• Ambient Temperature: 5-40°C
• Total Mass Above Floor: 216 tons

Special Equipment Features:

• Variable Speed Drive: Main motor with regenerative control
• Reversing Installation: Not available for press-down tests
• Micro-Inching: Low-speed rotation type for the main motor
• Flywheel Brake: Interlinked with the main motor
• Crank Angle Indicator: Electronic, within the main control panel
• Main Motor Power Meter: Digital display
• Press Speed Meter: Digital display
• Die Height Meter: Digital display with a resolution of 0.01 mm
• Die Height Adjustment: Electric manual via push-button operation, automatic with digital setting at 0.1 mm increments
• Load Measurement: Graphic display, ALA2 model strain gauge type (also detects overloads)
• Lubrication System: Forced circulation (installed in the pit), automatic intermittent lubrication
• Hydraulic Equipment Operation: Installed in the pit
• Control Panel: Stand-alone type, within 30 meters
• Operator Console: Located at the front right frame
• Operator Stand: Dual-hand operation with a 3-meter cable
• Receptacle for Operator Stand: Located at the front right frame
• Timing Switch: Digital, with four spare circuits
• Production Counter: Reset type with a stop function after a set number, 6-digit display
• Emergency Stop Button: Lock type, positioned at various points around the room and at the operator stand
• Setup Stop Device: Switches between top dead center and 600 mm stroke