Machine Name:CNC Horizontal Machining Center
Manufacturer:DECKEL MAHO
Model:DMC 80H duoBLOCK
Year of Manufacture:2011
Machine Id:134
Disclaimer:

This offering is courtesy of the seller. It is offered as a convenience by KRUDO Industrial to its clients and is not intended to convey ownership of this particular machine.

CNC Horizontal Machining Center DECKEL MAHO DMC 80H duoBLOCK
SOLD
CNC Horizontal Machining Center DECKEL MAHO DMC 80H duoBLOCK
CNC Horizontal Machining Center DECKEL MAHO DMC 80H duoBLOCK
CNC Horizontal Machining Center DECKEL MAHO DMC 80H duoBLOCK
CNC Horizontal Machining Center DECKEL MAHO DMC 80H duoBLOCK

Description:

CNC Horizontal Machining Center

  • Control: SIEMENS 840D solutionline
  • Design: direct drive by speed-controlled asynchronous motor with liquid cooling
  • Tool clamping system: SK 50 – with internal cooling lubricant supply
  • Taper: SK 50 DIN 69871 form AD
  • Tool clamping: Mechanical clamping with spring force
  • Tool relax: Hydraulically

Feed drive:

  • Design: AC motor, digitally controlled, directly coupled with
  • rotating ball screw for axes X, Y, Z.
  • Ball screw: X-axis liquid-cooled
  • Feed speed: X-, Y-, Z-axis 0 – 60000mm / min.
  • Rapid traverse: X, Y, Z axes 60m / min.
  • Feed force: X-, Y-axis max.13kN
  • Feed force in Z-axis: max. 9kN
  • Set-up operation: 20 – 2000m / min
  • Acceleration: X, Y, Z axes 7 / 6.5 / 6.5m / s2

Position measuring system:

  • Design: direct, absolute, photoelectric
  • Resolution: X-, Y-, Z-axis 0.001mm
  • Input resolution: X-, Y-, Z-axis 0.001mm
  • Position tolerance: X-, Y-, Z-axis 0.007mm
  • Position tolerance: A-axis * 9ws
  • Position tolerance: B-axis * 8ws
  • Position tolerance: C-axis * 7ws
  • Maximum workpiece height: 1330mm

NC rotary table:

  • Maximum torque: 40% ED 5000Nm
  • Holding torque of the table top at:
    • 100% ED (duty cycle) 3660Nm
    • 40% ED (duty cycle) 5000Nm

Max allowable:

  • Mass moment of inertia: 205kg m2
  • Maximum rotation: 35 1/min of the table top
  • Maximum feed: 12600 ° / min
  • Res. of the meas. System: 0.001 °
  • Maximum tilting moment: 10kNm

Palette:

  • Pallet clamping surface: 630 x 630 mm
  • Weight of the pallet approx. 265kg
  • Max. workpiece weight: 1400kg on the pallet

Chip conveyor:

  • LxWxH: 2500x1070x1540mm
  • Drop height: 950mm
  • Belt speed 2: +/- 15% m / min.
  • Chip length: max. 80mm
  • Chip passage height: 87mm
  • Weight chip conveyor: approx. 375kg

Band filter system:

  • Length: 1910mm
  • Width: 1780mm
  • Height: 1810mm
  • Fill volume: 980l
  • Weight belt filter system: approx. 780kg

Cooling unit machine:

  • Useful cooling capacity: 8kW
  • Power consumption: 5,3kW
  • Nominal voltage: 3 x 400V
  • Control voltage: 24VDC
  • Nominal current: 10.5A
  • Air throughput condenser filter: 8.5m3 / h
  • Heat output of the system: max. 12 kW
  • Weight (without filling): 200kg
  • Width x height x depth: 650 x 1170 x 450
  • Perm. oper. pressure water: min. 3 / max. 10bar
  • Pipe connection: 6 x 1 / 2bar
  • Conveyor pump: 35l / min at 5bar
  • Tank volume: 45l
  • Refrigerant: R 134 a
  • Fill weight refrigerant: 2kg
  • Degree of protection according to EN 60529 (DIN 40050) IP34

Cooling unit, electrical control cabinet:

  • Useful cooling capacity: 1.0kW
  • Refrigerant: R 134 a
  • Fill weight of refrigerant: 0.33kg
  • Temperature setting range: +20 – +55 ° C
  • Weight of the unit: 39kg

BLUM laser tool measurement:

  • Measurement accuracy: +/- 0.020mm
  • Repeatability: +/- 0.005mm
  • Minimum tool dia: 0.8mm
  • Max tool dia horiz.: 218mm
  • Max measurable tool length: 493mm horiz.

Infrared measuring probe:

  • Beam angle: 75 °

Oil / emulsion mist separator:

  • Length: 1300mm
  • Width: 500mm
  • Height: 750mm
  • Throughput volume: 1600m3 / h

Promote your used machinery online, find buyers with us.

Related to: CNC Horizontal Machining Center

134