Machine Name:Gear Grinding Machine CNC
Manufacturer:KAPP
Model:KX1
Year of Manufacture:1999
Location:Deutschland
Machine Id:215
Disclaimer:

The presented specifications have been prepared by the best of our knowledge and therefore, we cannot be held liable for any errors or omissions! Buyers are invited to inspect the offered Machinery & Equipment at current location prior to purchase.

 

KAPP KX1_right
SOLD
KAPP KX1_Documents
KAPP KX1_Felsomat Inside
KAPP KX1_Felsomat
KAPP KX1_Felsomat Control

Description:

Gear Grinding Machine CNC - KAPP KX1

The KAPP Gear Center is a six-axis gear hard machining system for straight and helical gears.

  • X-Axis: Support Slide
  • Y-axis: Radial slide
  • Z-axis: Z-carriage
  • A-axis: Workpiece spindle
  • B-axis: Swivel plate of the support slide
  • C-axis: Tool spindle

Technical specifications of the gearing center:

Control: SIEMENS SINUMERIC 840D

Dimensions and weights:

  • Base area (length x width x height): 5016 x 3025 x 2365 mm
  • Weight (net weight): 11 000 kg
  • Tool and workpiece
  • Max editable module: 5 mm
  • Number of teeth: 1-999
  • Outer diameter: 120 mm
  • Gear length: 150 mm
  • Angle of inclination: +35/-35 degrees

Axis travels:

  • X-axis: 220 mm
  • Y-axis: 110 mm
  • Z-axis: 120 mm
  • A-axis: 360 degrees
  • B-axis: -60/120 degrees
  • C-axis: 360 degrees

Maximum axle speeds:

  • X-axis: 10 000 mm/min
  • Y-axis: 10,000 mm/min
  • Z-axis: 8 000 mm/min
  • A-axis: 2 000 1/min
  • B-axis: 5400 degrees/min
  • C-axis: 7000 1/min

Axis resolutions:

  • X-axis: 0.0001 mm
  • Y-axis: 0.0001  mm
  • Z-axis: 0.0001  mm
  • B-axis: 0.001°

Electrical equipment:

  • Operating voltage: 400  VAC
  • Supply voltage: 24 VDC
  • Luminous voltage: 230VAC
  • Frequency: 50 Hz
  • Connection power of the gear center:  84/132  kW/kVA
  • Input protection: 125 A

Engine power:

  • X-axis: 8.5 kw
  • Y-axis: 8.5 kw
  • Z-axis: 1.9  kw
  • A-axis: 22 kw
  • B-axis: 6.3 kw
  • C-axis: 22 kw
  • Hydraulic pump: 2.2 kw
  • Pump for engine cooling A- and C-axis:2.2 kw

Other Specs:

  • Continuous sound level of the system: Approx. 78 db(A)
  • Compressed air consumption of the system: Approx. 18.0 m³/h

Technical data of the cooling lubricant system:

Dimensions and weights:

  • Dimensions of the cooling lubricant system (length x width x height): 3025 x 2275 x 2270 mm
  • Weight of the cooling lubricant system (net weight) without/with tank filling: 2000/4350kg
  • Tank capacity cooling lubricant system: 2350 l

Motor power:

  • Lifting pump Brinkmann, FRES 65-135:  4.0 kW
  • Pump machine supply Brinkmann, TC 450/560: 1.65 kW
  • Pump Grinding room cleaning Brinkmann, TA 302/320: 1.7 kW
  • Pump belt flushing Brinkmann TC 63/440: 1.1 kW
  • Drive belt transport Reber, gear motor type MI60: 0.4 KW
  • Drive Cleaning shaft  Reber. Gear motor type MI60: 0.4 kW
  • Pump Suction Chip tank Brinkmann SB 20:  0,17 kW
  • Hydraulic pump B-axis clamping/chuck Rexroth, motor pump-one. MPU1-V710-100L: 2.2 kW
  • Hydraulic pump Motor cooling Rexroth, motor-pump-inh. MPU1-V710-100L: 2.2 kW

Assemblies of the cooling lubricant system:

Bandpass filter:

  • Compact belt filter system RESY
  • Type KBF 1001/1040E

Filter area:

  • Endless belt
  • Filter power: 1000 l/min

Carbon lubricant cooling:

  • Immersion recolor: HYFRA Type TRK 90-S
  • Cooling capacity: 11.5 kW

Cooling hydraulic oil:

  • Immersion rock cooler: HYFRA, type TRK 50-S
  • Cooling capacity: 6 KW

Oil evasion extraction:

  • Oil mist separator AFS 1600
  • Air/oil mist flow rate: approx. 1600 m³/h

Promote your used machinery online, find buyers with us.

Related to: Gear Grinding Machine CNC

215