Machine Name:Profile Grinding Machine
Manufacturer:REFORM
Model:ZSM 800S
Year of Manufacture:2000
Location:Sint-Truiden - Belgium
Machine Id:207
Disclaimer:

This offering is courtesy of the seller. It is offered as a convenience by KRUDO Industrial to its clients and is not intended to convey ownership of these particular machines.

The presented specifications have been prepared by the best of our knowledge and therefore, we cannot be held liable for any errors or omissions! Buyers are invited to inspect the offered Machinery & Equipment at current location prior to purchase.

Profile Grinding Machine - REFORM ZSM 800S
SOLD
Profile Grinding Machine - REFORM ZSM 800S
Profile Grinding Machine - REFORM ZSM 800S
Profile Grinding Machine - REFORM ZSM 800S
Profile Grinding Machine - REFORM ZSM 800S

Description:

NC machine table (X-axis)
Travel speed: 0.1 - 30 m/min
Travel range: 800mm
Tip height: -K version .200 mm
grindable workpiece Ø: 10 - 250 mm
Center width (max. workpiece length): 800 mm
NC divider (A axis)
possible divisions: 1-999
Accuracy: ±3 angular seconds
Workpiece centering by centering tip: Version K MK3
Max. Speed: 80 min-1
NC grinding slide (Z-axis)
Feed step: 0.001 mm
Input fineness: 0.001 mm
Travel speed: max. 2 m/min
Travel: 335 mm
NC shift axis (transverse movement of the grinding wheel Y-axis)
Travel: ± 70 mm
Travel speed: max. 1m/min
Input fineness: 0.001 mm
NC dressing device (B; U and W axis)
Working area of the setter: 120 mm x 120 mm
Numerically controlled axes: 3
Feed speeds:
U-axis: 0-2500 mm/min
W-axis: 0 - 2500 mm/min
B-axis: 0 - 100 min-1
Step fineness:
U-axis: 0.0005 mm
W-axis: 0.0005 mm
B-axis: 0.025°
Grinding spindles (data are based on a maximum cutting speed = 120 m/s)
Spindle type with high-speed bearings: SK 63 --Grinding wheelsø 63 - 50 mm--Speed range: up to 25,000 min
Tailstock
Travel: Clamping stroke of the tip 49 mm
Height adjustability: ± 1 mm
Transverse adjustment: ± 2 mm
Tip angle of the tailstock tips: 60°
Coolant system
Coolant tank capacity: max. 3500 L
Volume for spindle cooling water: approx. 200 L
Medium: Rust protection r007.0014.003 Mixing ratio 1:10
Flow rate of the high-pressure pump L3MW-45/70-AFOKS-O: 160 l/min (p=50 bar)
Flow rate of the high-pressure pump L3MW-25/50-AFOKS-O: 26 Vmin (p=60 bar)
Coolant flow rate: 300l/min for ISO-VG 10
Electrical connection values:
Total connection value: 100 kVA
Voltage: 400V ± 5%
Frequency: 50 Hz ± 3%
Control voltage: 24 V
Performance of the engines
Motor for grinding spindle drive SK: 10 kW
Motor for divider (A-axis): Version K Peale (100) = 12.6 kW
Motor for machine table drive (X-axis): P_calc(100) = 14.7 kW
Motor for feed axis (Z-axis): P_calc(100) = 6,3 kW
Motor for shift axis (Y-axis): P_calc(100) = 1.3 kW
Motor for hydraulic power pack: 0, kW
Engine for lubrication unit (divider): 0,25 kW
Motor for lubrication unit (spindle table): 0,25 kW
Motor for NC converters (U; W; B-axis) : ): P_calc(100) = 0,63 kW
Motor for diamond dressing wheel: 0,075 kW
Motor for worm gear motor CA 41 M1 C4 (low-bed filter): 0.37 kW
Motor for worm gear motor SA 52 DT 71 D6 (low-bed filter): 0,25 kW
Motor for gear motor DR 62.0x 80-2/SG80 (low-bed filter): 0.086 kW
Motor for filling pump TB 160/550 (low-bed filter): 0.5 kW
Motor for filter lifting pump TB 400/450 (coolant system): 1.1 kW
Motor for high pressure pump-L3MW-45/70-AFOKS-O (coolant system): 18,5 kW
Motor for high pressure pump L3MW-25/50-AFOKS-O (coolant system): 5.5 kW
Motor for circulation pump TS 21/350 (coolant system): 0.63 kW
Immersion recooler: 16,7 kW
Extraction system AFS 1600: 1,02 kW
Pump divider + bed: 0,070 KW
CNC control
CNC control for 8 axes: Siemens System 8400

 

#6329

Promote your used machinery online, find buyers with us.

Related to: Profile Grinding Machine

207