Machine Name:Profile Grinding Machine
Manufacturer:REFORM
Model:ZSM 800
Year of Manufacture:2011
Location:Sint-Truiden - Belgium
Machine Id:202
Disclaimer:

This offering is courtesy of the seller. It is offered as a convenience by KRUDO Industrial to its clients and is not intended to convey ownership of these particular machines.

The presented specifications have been prepared by the best of our knowledge and therefore, we cannot be held liable for any errors or omissions! Buyers are invited to inspect the offered Machinery & Equipment at current location prior to purchase.

Profile Grinding Machine - REFORM ZSM 800
SOLD
Profile Grinding Machine - REFORM ZSM 800
Profile Grinding Machine - REFORM ZSM 800
Profile Grinding Machine - REFORM ZSM 800
Profile Grinding Machine - REFORM ZSM 800

Description:

Profile Grinding Machine REFORM ZSM 800

NC machine table (X-axis):

  • Travel speed: 0.1 - 30 m/min
  • Travel range: 800mm
  • Tip height: -K version .200 mm
  • grindable workpiece Ø: 10 - 250 mm
  • Center width (max. workpiece length): 800 mm

NC divider (A axis):

  • possible divisions: 1-999
  • Accuracy: ±3 angular seconds
  • Workpiece centering by centering tip: Version K MK3
  • Max. Speed: 80 min-1

NC grinding slide (Z-axis):

  • Feed step: 0.001 mm
  • Input fineness: 0.001 mm
  • Travel speed: max. 2 m/min
  • Travel: 335 mm

NC shift axis (transverse movement of the grinding wheel Y-axis):

  • Travel: ± 70 mm
  • Travel speed: max. 1m/min
  • Input fineness: 0.001 mm

NC dressing device (B; U and W axis):

  • Working area of the setter: 120 mm x 120 mm
  • Numerically controlled axes: 3

Feed speeds:

  • U-axis: 0-2500 mm/min
  • W-axis: 0 - 2500 mm/min
  • B-axis: 0 - 100 min-1

Step fineness:

  • U-axis: 0.0005 mm
  • W-axis: 0.0005 mm
  • B-axis: 0.025°
  • Grinding spindles (data are based on a maximum cutting speed = 120 m/s)
  • Spindle type with high-speed bearings: SK 63 --Grinding wheelsø 63 - 50 mm--Speed range: up to 25,000 min

Tailstock:

  • Travel: Clamping stroke of the tip 49 mm
  • Height adjustability: ± 1 mm
  • Transverse adjustment: ± 2 mm
  • Tip angle of the tailstock tips: 60°

Coolant system:

  • Coolant tank capacity: max. 3500 L
  • Volume for spindle cooling water: approx. 200 L
  • Medium: Rust protection r007.0014.003 Mixing ratio 1:10
  • Flow rate of the high-pressure pump L3MW-45/70-AFOKS-O: 160 l/min (p=50 bar)
  • Flow rate of the high-pressure pump L3MW-25/50-AFOKS-O: 26 Vmin (p=60 bar)
  • Coolant flow rate: 300l/min for ISO-VG 10

Electrical connection values:

  • Total connection value: 100 kVA
  • Voltage: 400V ± 5%
  • Frequency: 50 Hz ± 3%
  • Control voltage: 24 V

Performance of the engines:

  • Motor for grinding spindle drive SK: 10 kW
  • Motor for divider (A-axis): Version K Peale (100) = 12.6 kW
  • Motor for machine table drive (X-axis): P_calc(100) = 14.7 kW
  • Motor for feed axis (Z-axis): P_calc(100) = 6,3 kW
  • Motor for shift axis (Y-axis): P_calc(100) = 1.3 kW
  • Motor for hydraulic power pack: 0, kW
  • Engine for lubrication unit (divider): 0,25 kW
  • Motor for lubrication unit (spindle table): 0,25 kW
  • Motor for NC converters (U; W; B-axis) : ): P_calc(100) = 0,63 kW
  • Motor for diamond dressing wheel: 0,075 kW
  • Motor for worm gear motor CA 41 M1 C4 (low-bed filter): 0.37 kW
  • Motor for worm gear motor SA 52 DT 71 D6 (low-bed filter): 0,25 kW
  • Motor for gear motor DR 62.0x 80-2/SG80 (low-bed filter): 0.086 kW
  • Motor for filling pump TB 160/550 (low-bed filter): 0.5 kW
  • Motor for filter lifting pump TB 400/450 (coolant system): 1.1 kW
  • Motor for high pressure pump-L3MW-45/70-AFOKS-O (coolant system): 18,5 kW
  • Motor for high pressure pump L3MW-25/50-AFOKS-O (coolant system): 5.5 kW
  • Motor for circulation pump TS 21/350 (coolant system): 0.63 kW
  • Immersion recooler: 16,7 kW
  • Extraction system AFS 1600: 1,02 kW
  • Pump divider + bed: 0,070 KW

CNC control:

  • CNC control for 8 axes: Siemens System 8400

#1749

Promote your used machinery online, find buyers with us.

Related to: Profile Grinding Machine

202