Machine Name:Milling Machine
Manufacturer:MAG
Model:XG 692
Year of Manufacture:2015
Location:EU
Machine Id:456
Disclaimer:

This offering is courtesy of the seller. It is offered as a convenience by KRUDO Industrial to its clients and is not intended to convey ownership of these particular machines.
The presented specifications have been prepared by the best of our knowledge and therefore, we cannot be held liable for any errors or omissions!

Buyers are invited to inspect the offered Machinery & Equipment at current location prior to purchase.

Milling Machine
Milling Machine
Milling Machine
Milling Machine
Milling Machine

Description:

Metrics
Length x Width x Height:6400 mm x 3210 mm x 3434 mm
Total weight: 18000 kg
Operating voltage
Phases ±5%: 400 V ±5%
Frequency: 50 Hz ±1 Hz
Valve Voltage (DC): 24 V
Control Voltage (DC): 24 V
Connection cross-section: 50 mm²
Ballast fuse: 125 A
Installed capacity: 50 kVA
Direct Measuring System
Resolution: 0.0005 mm
Position uncertainty P*: 0.007 mm
Setting accuracy Ps*: 0.003 mm
* Accuracy according to VDI/DGQ 3441
Linear axes
X-axis: 750 mm
Z-axis : 250 mm
Axis
C-axis: 360 degrees
Linear axes
X-axis: 1 m/min – 120 m/min
Z-axis : 1 m/min – 30 m/min
C-axis
Speed: 0 – 30000 1/min
Achievement: 30 kW
Torque: 200 Nm
Positioning Accuracy: ±0°0'6''
Milling spindle
Speed: 2x 6000 1/min
Achievement: 2x 22 kW
Front Bearing Diameter: 70 mm
Spindle head with tool holder: HSK 63C DIN 69893
Lubrication: MQL
Central lubrication
Medium: Fluid Grease
Pressure: 25 bar
Container: 3 L
Tool Carrier
Capto C6 (HSK 63): Lithogrease 000
Motor / Spindle
Medium: Anti-rust water
Pressure: 2 bar to 3 bar
Container: 48 l
Flow rate: 100 l/min
Compressor cooling unit: air-cooled
Cooling capacity: 15 kW
Supply connections
Air quality (according to DIN ISO 8573-1): Class 4
Pressure dew point: 6 °C – 10 °C
Particle size: ˩P.ODVVH
Air consumption: 90 Nm³/h
Residual oil content: 10 mg/m³ – 15 mg/m³
Pneumatic connection: 5 bar – 6 bar
Control
Manufacturer: SIEMENS
Control: Sinumerik 840D_sl / PCU 50.3
Screen: 12-inch TFT / 800 x 600 pixels
Interfaces: Ethernet RJ 45 - USB front connector
Network: Ethernet
- Measurement at idle according to DIN 45635-01-KL3, 4 measuring points, each at a distance of 1 m from the machine.

 

#40307201

Promote your used machinery online, find buyers with us.

Related to: Milling Machine

456